Aluminum Pandoro tin Teflon-coated

Aluminium moulds for pandoro for professional use, available in three sizes, 500, 750 and 1000 grams.

Aluminium is a material that transmits heat very well and quickly, ideal for uniform baking without surprises. These moulds in particular, thanks to their 15/10 thickness, do not deform due to the heat and allow the product to rise very well during baking. To test the sturdiness of the mould you just need to exert a strong pressure on the mouth and see how much it deforms, our moulds hold the pressure perfectly and do not deform

Molds of lower thickness or material with different characteristics tend to lose stiffness very quickly, after a few firings, our molds can also be used intensively without showing any sign of structural failure.

These moulds provide professional non-stick properties. In fact, the Teflon DUPONT GREEN TDM allows the product to slide out of the mould and is suitable for food contact. Guaranteed treatment for 2000 cookings if used in the correct way.

Moulds made in Italy and certified for food contact

CAREFUL USE AND MAINTENANCE OF THE TEFLONING:

The cookware must not be placed in the hot oven without the product inside, as thermal stresses deteriorate the non-stick treatments, reducing their durability. When handling or stacking, do not scratch the metal surfaces and/or the coating with abrasive tools or brushes. To remove residues of bread or grease, use sponges or damp cloths, or wash with running water at max. 60°C and in any case with pressures below 10 bar. You canò use alkaline detergents with low concentration, as long as they are suitable for cleaning articles that come into contact with food and do not contain aggressive substances.