Delivery time 48/72 hours (holidays and islands excluded).
Payment in 3 instalments from 30 euros.
Teflon-coated perforated aluminium tray 60x80x2(h.) cm, thickness 15/10, with welded edges.
Teflon-coated perforated aluminium trays 60x80x2(h.) cm.
Aluminium guarantees excellent heat transmission and lightness. This material heats up very quickly and consequently transmits heat to the product quickly and evenly. In addition, the low weight of aluminium combined with microperforations make them incredibly light and easy to handle compared to similar models in LS or steel.
The micro-perforation is ideal for air baking, as the convection cycle created inside the oven can pass through the holes and directly affect the product even in the part in contact with the pan, guaranteeing better baking even inside.
The Teflon coating is an industrial process based on the spray application of DUPONT TDM200 Teflon with green pigment. This process is guaranteed for 2000 cooking cycles if maintained correctly (read the USE AND MAINTENANCE norms in the details section) and guarantees professional-level non-stick properties, avoiding the use of natural or chemical food release agents
These 60x80 cm Teflon coated perforated aluminium trays are tested up to 280°C and are suitable for baking food products.
Other important features are the 90° folded edges and hand welded corners which give greater resistance to both thermal deformation and weight.
As they are made of aluminium, they do not need to be burnt and do not fear contact with water.
Because they are intended for contact with foodstuffs, they must be cleaned after each use and stored in a hygienically appropriate place.
CREDIT CARDS
PAYPAL
Payment in 3 installments without interest for orders over € 30
SATISPAY
BANK TRANSFER
KLARNA
Payment in 3 installments without interest for orders over 35 €
BANK REDIRECTIONS
USE AND MAINTENANCE:
They must not be introduced into the hot oven without the product inside, as thermal stresses deteriorate the non-stick treatments, reducing their duration over time. When handling or stacking, do not scratch the metal surfaces and/or the coating with abrasive tools or brushes. To remove residues of bread or grease, use sponges or damp cloths, or wash with running water at max. 60° and in any case with pressures below 10 bar. Low-concentration alkaline detergents may be used as long as they are suitable for cleaning items that come into contact with foodstuffs and do not contain aggressive substances.
When in stock, the delivery time for the product is 1-3 working days. For pre-orders (products that are not in stock, but can still be ordered on the website), times may vary depending on supplier availability.