Non stick baking tray in aluminized steel cm 60x40

Thisbaking tray from 60x40 cm inteflon-coated aluminised sheet metal is designed for theprofessional usewith edges available in heights from 2 to 5 cm. Its dimensions are ideal forprofessional ovensboth flat and convection (rotor), guaranteeing versatility and high performance.

Laaluminised sheet metal (LS), consisting of an iron base coated with aluminia, ensures excellent heat transmission, great strength and the ability to retain heat for longer than traditionalaluminium pans. With a thickness of 8/10 mm, theseprofessional baking trays offer optimal thermal transmittance while maintaining high deformation resistance, even in the presence of imperfectly balanced ovens.

The 90° folded edges and hand-welded corners further enhance their structural stability, making them ideal for intensive use.

The strength of theseoven plates is theindustrial tefloninga layer ofTeflon DUPONT TDM200 (with its characteristic green pigment) by spraying. This treatment ensuresprofessional non-stick up to 2000 cooking cycles, provided the correct maintenance procedures are followed (see 'Use and Maintenance' section). This eliminates the need to use natural or chemical food release agents, improving efficiency and cleanliness in the kitchen.

Le60x40 pans cm are tested up to 280°C and suitable for baking any food product, from bakery to pastry.

As these pans are intended for food contact, they must be cleaned after each use and stored in a clean and hygienically controlled environment, always following the specific instructions to preserve the non-stick coating.

USE AND MAINTENANCE:

They must not be introduced into the hot oven without the product inside, as thermal stresses deteriorate the non-stick treatments, reducing their duration over time. When handling or stacking, do not scratch the metal surfaces and/or the coating with abrasive tools or brushes. To remove residues of bread or grease, use sponges or damp cloths, or wash with running water at max. 60° and in any case with pressures below 10 bar. Low-concentration alkaline detergents may be used as long as they are suitable for cleaning items that come into contact with foodstuffs and do not contain aggressive substances.

When in stock, the delivery time for the product is 1-3 working days. For pre-orders (products that are not in stock, but can still be ordered on the website), times may vary depending on supplier availability.