Baking tray in aluminized steel cm 30x40

Aluminised sheet baking tray 30x40 cm, available with edges of heights ranging from 2 to 5 cm. Ideal dimensions also for home ovens.

Aluminised sheet metal (LS) guarantees excellent heat transmission and great strength. It is in fact an inferro base enamelled with alumina, this union means that the pan heats up less quickly than the aluminium counterparts, but it manages to absorb more heat and keep it for longer. In addition, thanks to its thickness of 8/10, it has an excellent thermal transmittance

In spite of its reduced thickness compared to aluminium, this product is just as resistant to thermal and structural deformation, if not more robust in ovens that are not perfectly balanced. Other important features include 90° bent edges and manually welded corners

The trays are tested up to 280°C and are suitable for baking food products.

For the first use è it is recommended to perform the blanching. This particular procedure consists of greasing the baking tray with cooking oil (after washing and drying it well) using a brush or kitchen paper, and then placing it in an oven preheated to maximum power for 10-15 minutes. This process creates a protective patina on the surface, which helps the preservation of the pan preventing oxidation'

Trattandosi materialedestinatoal contact with food must be cleaned after each use, avoiding putting it under running water and using a non-abrasive sponge, dried with great care, to avoid the possible formation of rust spots over time, and then placed in places hygienically adequate.

Watch the video to find out more about our trays.